Tata Steel Plans Hydrogen From Plant Off-Gases at Kalinganagar
Tata Steel, with US-based Utility Global, will carry out engineering studies for a 10 tonnes-per-day plant at Kalinganagar, Odisha, that makes hydrogen from steelmaking off-gases, which the company calls a first for India. The project still needs a Final Investment Decision from Tata Steel's board and is part of the company's net-zero-by-2045 target.

Key takeaways
- Tata Steel and Houston-based Utility Global will undertake joint FEED studies for a hydrogen project at Kalinganagar, Odisha.
- The planned plant will have 10 tonnes per day capacity and use Utility Global's H2Gen technology on steel plant off-gases.
- The company describes it as the first such initiative in India.
- Installation depends on a successful Final Investment Decision by Tata Steel's board.
- The project supports Tata Steel's goal of net-zero emissions by 2045.
Tata Steel has announced plans to produce hydrogen from the off-gases generated during steelmaking at its Kalinganagar plant in Odisha. The company says this would be the first initiative of its kind in India. It will work with Houston-based Utility Global on the project, which is at the engineering-study stage and has not yet received a final go-ahead.
What happened
The company said on Wednesday that it and Utility Global will conduct joint Front-End Engineering and Design (FEED) studies. These studies are meant to support a Final Investment Decision (FID) by Tata Steel's board on the proposed facility.
The plant would use Utility Global's H2Gen technology and have a planned capacity of 10 tonnes per day (TPD). It would take off-gases produced in the steelmaking process and convert them into high-purity hydrogen.
If the FID is successful, the FEED phase will be followed by installation and operation of the plant at Kalinganagar. The announcement did not give the project's cost, a timeline or the financing structure, so these remain unknown for now.
The technology in brief
According to the company, Utility Global has developed an electrochemical process that produces high-purity hydrogen from carbon monoxide-rich gases generated at steel plants. Blast furnace gas is one such stream. Steel plants usually produce these gases as by-products, and they are often reused as fuel within the works.
The company said the technology has earlier been demonstrated using actual blast furnace gas at a steel producer's facility in Canada. The Kalinganagar project would therefore apply an already tested approach in an Indian operating plant. How it performs at the scale and complexity of a working steel mill is what the FEED work and any later operation will help show.
What Tata Steel said
Subodh Pandey, Vice-President (Technology, R&D, New Materials Business and Graphene) at Tata Steel, said any technology must work at the scale and complexity of an operating steel plant to make a meaningful contribution to steel decarbonisation. He said technologies such as H2Gen let the company pursue emissions reduction while making use of existing infrastructure.
Pandey described the tie-up with Utility Global as another pivotal milestone in Tata Steel's journey towards deeper operational decarbonisation.
Why it matters for investors
Steel is one of the most carbon-intensive industries, and large producers are under growing pressure to show credible routes to lower emissions. Hydrogen is widely discussed as one tool for this, but producing it cleanly and at reasonable cost remains a challenge. A route that draws on gases a plant already generates, and on infrastructure already in place, is one of several approaches companies are testing.
For shareholders and market watchers, a few points are worth keeping in mind:
- Early stage: The project is at the study phase. No FID has been taken, and the company has not disclosed the investment size.
- Modest scale: A capacity of 10 TPD is small against the overall output of a large integrated steel plant. The company's focus is on proving that the technology works in real operating conditions.
- Part of a wider portfolio: Tata Steel describes the initiative as one of its low-carbon steelmaking projects, not a standalone bet.
- Long-term target: The project supports the company's commitment to reach net-zero emissions by 2045.
Pilot-scale projects like this seldom move quarterly earnings. They are more relevant to how a company positions itself on technology, regulation and customer expectations over the long run. Any financial impact would depend on costs, performance and the way the hydrogen is used, none of which the announcement covers.
Background
Kalinganagar, in Odisha's Jajpur district, is one of Tata Steel's major integrated steelmaking sites in India. The company's operations are headquartered in Jamshedpur, from where the announcement was made.
Tata Steel has framed its decarbonisation effort as a portfolio of projects rather than a single solution, and it has set a net-zero target for 2045. In steelmaking generally, the main routes to lower emissions include improving energy efficiency, using more scrap, adopting new process technologies and using alternative reducing agents such as hydrogen. Which combination works best depends on the plant, the available raw materials and the cost of energy.
Hydrogen made from off-gases differs from hydrogen made by splitting water with renewable electricity. It relies on gases that are already produced in the steelmaking process. The announcement does not classify the hydrogen by colour or give its carbon footprint, so readers should avoid assuming a specific label until the company shares more details.
What to watch next
- FEED outcome: The results of the joint studies will shape the technical and commercial case for the plant.
- Board decision: Whether Tata Steel's board approves the FID, and when, will determine if the project moves to installation.
- Disclosures on cost and use: Details on capital outlay, timelines and how the hydrogen will be used within the plant would clarify the project's economics.
- Operating performance: If the plant is built, data on its output, purity and reliability at Kalinganagar would indicate whether the approach can be replicated elsewhere.
- Wider decarbonisation steps: Further announcements under Tata Steel's low-carbon portfolio may show how this project fits into the 2045 net-zero plan.
For now, the Kalinganagar plan is a step from concept towards engineering, with the key investment decision still ahead. Investors tracking the steel sector's energy transition may want to follow how the FEED studies progress and what the company discloses next.
Frequently asked questions
What is Tata Steel planning at Kalinganagar?
Tata Steel plans a project to produce high-purity hydrogen from steel plant off-gases at its Kalinganagar facility in Odisha, using Utility Global's H2Gen technology. The planned capacity is 10 tonnes per day.
Who is Tata Steel working with?
Tata Steel is partnering with Houston-based Utility Global, which has developed an electrochemical process to make hydrogen from carbon monoxide-rich gases generated at steel plants.
Has the project been approved?
Not yet. The two companies will first carry out joint FEED studies to support a Final Investment Decision by Tata Steel's board. Installation will follow only if the FID is successful.
Has the technology been proven?
The company said it has previously been demonstrated using actual blast furnace gas at a steel producer's facility in Canada.
How does this fit Tata Steel's climate goals?
The initiative is part of Tata Steel's portfolio of low-carbon steelmaking projects and supports its commitment to achieve net-zero emissions by 2045.
This article is for information only and is not investment advice.